Call our team
01600 860 344
Filtration systems and settlement tanks are effective ways of removing sediment and physical contaminants from your water supply. Our most common application for filtration is to remove sediment from the water to provide a clear sample of water for an ultraviolet unit to treat.
The filter type and size is dependent on the required flow rate and quantity of sediment in the water, filters are generally sized in 10” increments and come in 2 different diameters a ‘standard’ 2.5” diameter and a larger 4.5” diameter. For depth filtration as a rule of thumb FWT generally recommend approximately 10” of filtration for every 15 litres/min of flow.
(Please visit our shop.)
Unlike many companies in the market we only supply WRAS approved filter cartridges for standard sediment removal to ensure compliance with the private water regulations.
The spun range resemble long reels of compressed cotton wool and are a cost effective way of removing fine sediment from the water. Our filters offer the essential WRAS approval, dirt holding capacity and low cost. FWT generally install at least a 5-micron spun filter prior to an ultraviolet treatment unit to ensure a clear sample of water for the UV light to penetrate, available in standard and big blue diameters. Within the range of WRAS approved filters there are options including a silver-impregnated filter designed to offer additional anti-microbial protection or a standard spun cartridge.
The pleated range offer an increased efficiency and a greater range of filtration sizes including finer filtration. Constructed of all-polypropylene materials encased in a ridged outer. Pleated filters are available in a range of efficiencies up to 100% efficient and micron ratings 0.003 – 100. Filters are generally not able to control bacteria in water but can remove cysts, such as Crytosporidium. Pleated filters are generally more expensive than spun filters and are available in standard and large diameters.
As their name implies, these filters consist of a bag inside a filter housing through which the water flows leaving the sediment behind. These filters are made of various synthetic fibres, such as polyester or polypropylene, and come in various shapes, sizes and micron ratings to suit many applications.
Bag filters allow large volumes of contaminated water to be filtered where a high flow rate and lower efficiency are needed. They require a large diameter bag housing.
Activated carbon filters are effective in the removal of tastes and odours from water and for the reduction of chlorine. They also have the ability to reduce many organic compounds. Specially prepared activated carbon is selected for its efficient filtration capabilities from a variety of material sources. A large surface of available filtration area is achieved by the creation of many fine pores and channels in each of the carbon granules. Carbon filters are sometimes used as a polisher as part of a filtration cascade. Carbon filters are available for both standard and large diameter filter housings.
If you need to remove large volumes of sediment, standard filter systems may not be the most efficient method. A back- washable filter system is capable of filtering out large quantities of sediment to a nominal 5 micron. It consists of a vertical chamber containing the media through which the water passes and the sediment is trapped, the media is then back washed at a pre-determined quantity of water or time to a drain. A standard sediment removal filter is usually recommended after the media unit if the water is used for human consumption.
A water storage tank can be used to store water before use and carry out the settlement process if large quantities of sediment are to be removed. Our engineers will ensure the correct configuration of pipe work to cater for the build-up of sediment and to avoid turbulence. Regular inspection of the system is required to ensure the system continues to work effectively; after a period of time the tank will require cleaning to remove the build-up of sediment.
These generally consist of a column of sand through which the water is passed. Different grades of sand can be used depending on the quantity of sediment to be removed. Sand filters are useful where there is a lot of sediment in the water and where there is insufficient time to allow for settlement, as is the case for high volume spring or borehole supplies, swimming pools or irrigation systems. They are usually used as a pre-filter in conjunction with other types of filtration and need to be regularly backwashed to remove the sediment build up; they are not effective at removing fine sediment.
WRAS approved water filters and filter housings
WRAS approved 10 inch standard water filters and filter housings, 0.05 – 50 micron. WRAS approved 20 inch standard water filters and filter housings, 0.05 – 50 micron. WRAS approved 10 inch Big blue water filters and filter housings, 0.05 – 50 micron. WRAS approved 20 inch Big blue water filters and filter housings, 0.05 – 50 micron.
WRAS approved pleated water filters
WRAS approved Bag filters 10 inch and 20 inch, wide range of micron options
WRAS approved Carbon filters, remove chlorine taste and odour from mains water.
WRAS approved Carbon filters, remove chlorine taste and odour from mains water.
If you need to remove large volumes of sediment, standard filter systems may not be the most efficient method. The Micro Z back washable filter system is capable of filtering out large quantities of sediment to a nominal 5 micron.
10 inch standard filter housing.
20 inch Big Blue filter housings with optional pressure guages
20 inch standard filter housings with optional pressure guages
water storage tanks can be used to store water before use and carry out the settlement process if large quantities of sediment are to be removed.